In this article, we will go through the step-by-step process of building a beautiful Hickory Farmhouse Apron Table with Metal X Legs. This table is a stunning addition to any space and is built to last. We will discuss the materials and tools needed, as well as provide detailed instructions on each stage of the building process. So let’s dive in and learn how to create this impressive piece of furniture.

Materials and Tools Needed

Before we begin, let’s gather all the necessary materials and tools for this project:

  • Hickory wood
  • Jointer
  • Planer
  • Table saw
  • Biscuit joiner
  • Clamps
  • Card scraper
  • CA glue
  • Fast acting activator
  • Sandpaper
  • Correct track saw
  • Router with an eighth inch round over bit
  • Rubio Monocoat Pure finish
  • Compressed air
  • Brush
  • Tack cloth
  • Screws
  • Wood glue
  • Table top clips
  • Welded metal X legs
  • Paint

Step 1: Milling the Hickory Wood

The first step in building this table is to mill the hickory wood. Use a jointer and a planer to get the wood down to the desired thickness. Take note that the table top ended up thinner than expected, which made it flimsy. However, this issue will be resolved later in the process.

Step 2: Cutting the Boards to Width

Use a table saw to cut the boards to their final width. Take measurements of the thinnest spot on the boards and adjust the table saw accordingly. Cut each board to its specific width, ensuring maximum usage of the wood. Lay out the boards on a workbench to visualize the entire tabletop and make any necessary adjustments for a seamless and beautiful color from side to side.

Step 3: Creating Biscuit Joints

After cutting the boards, mark and cut biscuit joints using a biscuit joiner. These joints will aid in aligning the boards during the clamping process. Clean out the biscuit joints to ensure a proper fit during assembly. Apply Titebond 2 glue to the joints for a seamless looking joint.

Step 4: Gluing and Clamping the Tabletop

Apply plenty of glue to the biscuit joints and use clamps to secure the boards together. Make sure to apply proper clamping pressure to avoid any bowing or warping in the tabletop. Allow sufficient time for the glue to set.

Step 5: Prepping and Sanding the Tabletop

Once the tabletop has set, use a card scraper to smooth out any imperfections in the joints. Fill any cracks or fissures with CA glue to achieve a smooth surface. Sand the tabletop using a six-inch Mirka sander, taking extra time due to the hardness of hickory wood. Pay attention to any delamination and fill it with epoxy if necessary.

Step 6: Squaring and Cutting to Length

Square up the ends of the table using a track saw. Cut the table down to its final length, ensuring it matches your desired measurements. Use the table saw and its 36-inch capacity to achieve a perfectly straight cut.

Step 7: Applying the Finish

Before applying the finish, prepare the table by removing any dust particles. Use compressed air, a brush, and a tack cloth for thorough cleaning. Apply Rubio Monocoat Pure finish using a squeegee technique, ensuring even coverage. Start with the underside of the table, then flip it over and work on the top before the finish cures. Apply a second coat for extra protection if desired.

Step 8: Adding Apron Frame and Legs

To reinforce the tabletop, create an apron frame using additional hickory wood. Screw and glue the frame to the tabletop, concealing the screws for a seamless look. Use table top clips to attach the apron frame securely while allowing for expansion and contraction. Finally, attach the welded and painted metal X legs to complete the table.

And there you have it! A beautiful Hickory Farmhouse Apron Table with Metal X Legs. This table is not only visually appealing but also durable and long-lasting. Whether you’re using it as a kitchen table or a showpiece in your home, this DIY project is sure to impress. Enjoy the satisfaction of creating a stunning piece of furniture with your own hands.

Don’t forget to check out the Carolina Shoes sponsor for this video. They offer a wide range of protective footwear that is perfect for construction projects like this. Use the code “DIYTyler” to receive a 25% discount on any shoes or boots at the link provided in the description.

Thank you for joining us in this furniture-making journey. We hope you found this article informative and inspiring. Now go out there and create your own masterpiece!